Skip to content
ALUSET

Installation has never been easier.

ALUSET prepares every part for you — all you do is install it!

Precision. Time saved. Simpler installation.

Architecture that opens at a touch.

ALUSET designs, manufactures and installs aluminium roller shutters in Skopje: manual, motorised or remote-controlled, made to the exact dimensions of every opening.

Technical data

Box
Standard / half-square box, Half-round box, Facade-mounted box
Colours
  • White
  • Silver
  • Anthracite
  • Golden Oak
Control
Manual, Electric motor with wall switch, Motor with remote control
Manufacturing
To dimensions measured on site

Aluminium roller shutter

For windows and doors

Finish

Silver

Opening

38%

Illustrative view. On-screen colours are approximate.

A curtain of aluminium slats that rolls into a box above the opening. It shields from sun and view, with a box and colour chosen to suit the facade.

View the aluminium shutter
  • Box and colour of your choice
  • Manual, motorised or remote-controlled
  • Made to the measured dimensions

Electric motor with wall switch

Finish

White

Opening

30%

Illustrative view of a tubular motor. Motor size and power depend on the shutter.

Motorised roller shutter

With wall switch

The motor sits inside the shutter's axle and cannot be seen from outside. One press of the wall switch raises or lowers it.

  • Electric motor with wall switch
  • No strap and no effort
  • Chosen directly in the configurator
View the motorised shutter

Remote-controlled shutter

Control from a distance

A motor with a radio receiver and the remote included. The shutter opens and closes without you leaving your seat.

  • Remote included
  • Motor inside the axle
  • Chosen directly in the configurator
View options

Motor with remote control

On-screen simulation: the remote's buttons raise, stop or lower the shutter in the 3D view. It does not send a radio signal.

Finish

Anthracite

Opening

25%

The on-screen remote is a concept design, not a specific model. Motor and remote are included in the remote-control option.

Facade-mounted box. The box mounts on the outer face of the wall, above the opening

Finish

White

Opening

35%

Wall and window are illustrative only. Dimensions, guide-rail colour and mounting details are illustrative; mounting is decided after measuring on site.

Facade roller shutter

Box on the outer face

When the box cannot sit inside the wall, it mounts on the outer face of the facade, with clean lines that suit the building.

  • Box for facade mounting
  • Manual, motorised or remote-controlled
View details

Made-to-measure roller shutter

For non-standard openings

Large sizes, special angles or combinations not on the list: we measure, design and manufacture them one by one.

  • Measured on site
  • Designed for your opening
Contact us

Finish

Anthracite

Opening

30%

Opening measurements

Opening: 150 × 145cm

60–300 cm

60–280 cm

Demonstration limits for the 3D model, not manufacturing limits.

These are opening measurements, not manufactured product dimensions. The 3D model is a visual approximation: box, profiles and production dimensions are decided after measuring on site. No price is calculated and nothing is saved to a quote.

Engineering you don't see. You feel it.

A good shutter is only noticed when it fails. That is why we look after every millimetre before it reaches you.

Opening dimensions, measured on site

  1. Opening width
  2. Opening height

Conceptual illustration. Technical details may vary by product.

Technical view: Custom dimensions

  • Every shutter is made for the measured width and height of your opening.

  • Aluminium slats, boxes and guide rails, designed for exterior use.

  • Production follows the measurements taken on site, so the shutter runs freely in its guides.

  • A motor inside the axle, with wall switch or remote control, invisible from outside.

  • The shutter colour is chosen to match the facade and windows.

    • White
    • Silver
    • Anthracite
    • Golden Oak
  • Our own team installs after measuring on site, with care for detail.

How ALUSET works

Four steps and one team, from the first measurement to installation.

  1. 01

    Measure

    We visit the site and measure every opening.

    154015401880mm
    Conceptual illustration
  2. 02

    Design

    We define the box, colour and motor.

    15401880AA–ABB1:20
    Conceptual illustration
  3. 03

    Manufacture

    Every shutter is made to the measured dimensions.

    Conceptual illustration
  4. 04

    Install

    Our team installs and adjusts everything on site.

    Conceptual illustration

Your shutter's price, in a few minutes.

The configurator uses ALUSET's active price table, calculates the price instantly and prepares a PDF quotation.

Illustrative view
Opening measurements
Box type
Colour
Operation
Installation

Indicative price

Total for 1 shutter€61.20

Continue in the configurator
Actual area
1,80 m²
Billable area
1,80 m²
Selected price per m²
€34.00 / m²
Motor surcharge
€0.00

Prices exclude VAT. Prices are indicative; ALUSET confirms the quotation. Your selection moves to the full configurator, which recalculates the price. Nothing is saved and no quotation is sent from this page.

Projects

Roller shutters installed by ALUSET. Published only with the client's approval.

Project gallery

The first projects are being prepared

We will soon publish projects completed by ALUSET, with our clients' approval.

Ask for references

Tell us about your opening.

Call, write or send a request. We arrange the on-site measurement together.

Address
Ferid Bajram St. 8a, Skopje, North Macedonia
ALUSETACADEMY

Installation guide — Aluminium roller shutter

0:00 / 4:2001 · Positioning

01 · Fitting the box

Positioning, shaft, levelling with a spirit level

The electrical connection of the motor is made only by a qualified technician. Fixing points and screw types are checked against ALUSET's technical documentation.